Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Yapılandırma Kılavuzu - Sayfa 18
Depolama Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 29 sayfaları. Fibre channel/ eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems, eternus dx400 s2 series, eternus dx8700 s2 disk storage systems, eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection
Sayfayı Yazdır
Chapter 4 Set Up the ETERNUS DX/AF Storage System for BS2000
4.4 Configure the RAID Groups and Create the Logical Volumes
4.4
Configure the RAID Groups and Create the Logical Volumes
Configure a RAID Group
Controller
DX/AF series
With the (default) setting "Controlling CM = Auto" ETERNUSmgr automatically assigns the RAID group to a
Control Module (CM) and a CPU in the CM. The assignment can also be made directly by specifying a CM# and
a CPU#.
As FC ports are also assigned to a CM and a CPU, direct assignment can also lead to better performance results
under certain circumstances.
Create the Logical Volume on a RAID Group
Controller
DX/AF series
A maximum of 128 Volumes can be created per RAID Group
BS2000 supports a maximum of 2**32 - 1 blocks of 512 bytes per logical volume. Logical volumes of 2TB or
larger are thus not completely utilized by BS2000. Only use values of up to 2048 x 1024 = 2,097,152 in
"Capacity".
The recommended capacity of the logical volumes for BS2000 should be between 25 GB and 100 GB.
The maximum supported LUN capacity is 2TB.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
RAID Group
Volume
18
Copyright 2018 FUJITSU LIMITED
Category
Category
Action
Create
Action
Create
P3AM-5672-10ENZ0