Fujitsu ETERNUS DX100 S3 Kurulum Kılavuzu - Sayfa 14

Depolama Fujitsu ETERNUS DX100 S3 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Fujitsu ETERNUS DX100 S3 15 sayfaları. Hybrid storage systems, all-flash arrays, power synchronized unit
Ayrıca Fujitsu ETERNUS DX100 S3 için: Yapılandırma Kılavuzu Sunucu Bağlantısı (12 sayfalar), Yapılandırma Kılavuzu Sunucu Bağlantısı (12 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (13 sayfalar), Güvenlik Önlemleri (12 sayfalar)

Sayfayı Yazdır
Fujitsu ETERNUS DX100 S3 Kurulum Kılavuzu

Operation and Maintenance

Status check

The status of the ETERNUS DX should be regularly monitored by checking the LEDs and using ETERNUS Web GUI.

Data backup

Important data should be regularly backed up to a tape drive or similar device as a precaution against system failures.
Maintenance support period
The standard maintenance support period for ETERNUS DX is five years from the date of purchase, or is defined in your service
level agreement (SLA). Contact your sales representative for details if you prefer to extend the period.
Operation Guide (Basic)
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
• The content of this manual is subject to change without notice.
• This manual was prepared with the utmost attention to detail.
However, Fujitsu shall assume no responsibility for any operational
problems as the result of errors, omissions, or the use of
information in this manual.
• Fujitsu assumes no liability for damages to third party copyrights
or other rights arising from the use of any information in this
manual.
• The content of this manual may not be reproduced or distributed in
part or in its entirety without prior permission from Fujitsu.
14
Copyright 2017 FUJITSU LIMITED
Setup Guide
P3AM-7852-06ENZ0
Date of issuance: April 2017
Issuance responsibility: FUJITSU LIMITED
P3AM-7852-06ENZ0