Fujitsu ETERNUS DX400 S2 Series Yapılandırma Kılavuzu - Sayfa 11
Depolama Fujitsu ETERNUS DX400 S2 Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Fujitsu ETERNUS DX400 S2 Series 38 sayfaları. Server connection. (fibre channel) for aix
Sayfayı Yazdır
Chapter 3
Notes
Note the following issues when connecting the ETERNUS DX/AF to a server.
3.1
ETERNUS DX/AF Setup Notes
The following settings will depend on the exact connection conditions.
Host Response settings
•
"Host Specific Mode" and "Reservation Conflict Response for Test Unit Ready" settings
Reset Group settings
•
Perform the settings correctly by referring to "Configuration Guide -Server Connection- Storage System Set-
tings" that corresponds to the ETERNUS DX/AF to be connected.
3.2
Notes Regarding the Number of LUNs
The maximum number of LUNs vary according to the system environment.
System environment
Single path (FJspio) environment
ETERNUS DX/AF ODM package for AIX
MPIO
ETERNUS Multipath Driver 2 (AIX) envi-
ronment
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
ETERNUS DX/AF
ETERNUS DX S4/S3 series,
ETERNUS AF series,
ETERNUS DX200F,
ETERNUS DX80 S2/DX90 S2,
ETERNUS DX400 S2 series,
ETERNUS DX8000 S2 series
Maximum 512 LUNs
Exact details depend on the OS being used.
There are no specific ODM package restrictions.
Exact details depend on the OS being used.
There are no specific multipath driver restrictions.
11
Copyright 2018 FUJITSU LIMITED
ETERNUS DX60 S2
Maximum 256 LUNs
P3AM-3782-23ENZ0