Fujitsu Eternus DX410 S2 Kullanıcı Kılavuzu - Sayfa 26
Depolama Fujitsu Eternus DX410 S2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu Eternus DX410 S2 42 sayfaları. Disk storage system settings
Ayrıca Fujitsu Eternus DX410 S2 için: Kullanıcı Kılavuzu (35 sayfalar), Kurulum Kurulumu (20 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Chapter 6
Setting Up the VMware ESX Server
6.1
For VMware vSphere
4
Execute the following command in the terminal:
esxcli corestorage claimrule run
5
Check that the connected ETERNUS DX Disk storage system is shown when the appropriate command is
executed in the terminal:
Command
esxcli nmp satp listrules --satp VMW_SATP_ALUA
Display result
When connecting to an ETERNUS DX60/DX60 S2, DX80/DX80 S2, or DX90 S2
•
VMW_SATP_ALUA FUJITSU ETERNUS_DXL tpgs_on ETERNUS_DXL with ALUA
When connecting to an ETERNUS DX400/DX400 S2 series
•
VMW_SATP_ALUA FUJITSU ETERNUS_DX400 tpgs_on ETERNUS_DX400 with ALUA
•
When connecting to an ETERNUS DX8000/DX8000 S2 series
VMW_SATP_ALUA FUJITSU ETERNUS_DX8000 tpgs_on ETERNUS_DX8000 with ALUA
6
Log out of the terminal, and restart the VMware ESX server.
Refer to the following for details of the above commands:
Reference URL:
•
http://www.vmware.com/support/pubs/
Reference documents:
•
"vSphere Command-Line Interface Concepts and Examples"
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
26
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0