Brother Inkjet MFC-J4710DW Manuel - Sayfa 13

Yazdırma Sunucusu Brother Inkjet MFC-J4710DW için çevrimiçi göz atın veya pdf Manuel indirin. Brother Inkjet MFC-J4710DW 22 sayfaları. Quick setup guide - spanish
Ayrıca Brother Inkjet MFC-J4710DW için: Manuel (36 sayfalar), Ürün Güvenlik Kılavuzu (17 sayfalar), Manuel (13 sayfalar), Manuel (13 sayfalar), Hızlı Kurulum Kılavuzu (47 sayfalar), Ürün Güvenlik Kılavuzu (20 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Kurulum Kılavuzu (47 sayfalar), (İspanyolca) Guia De Web Connect Kılavuzu (38 sayfalar), (İspanyolca) El Kitabı (24 sayfalar), (İngilizce) Ürün Güvenlik Kılavuzu (16 sayfalar), (İspanyolca) El Kitabı (12 sayfalar), (İspanyolca) El Kitabı (11 sayfalar), (İngilizce) Hızlı Yapılandırma Kılavuzu (47 sayfalar)

Configuration methods

Configuring your network using Wi-Fi Direct

(For DCP-J4110DW, MFC-J2310/J4310DW/J4410DW/J4610DW)

The Wi-Fi Direct network settings are configured from the control panel of your Brother machine.

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network.

NOTE

When the machine receives the Wi-Fi Direct request from your mobile device, the message

Received Wi-Fi Direct connection request. will be displayed. Press Connect to connect.

Press Settings.

Press s or t to choose Network.

Press s or t to choose Wi-Fi Direct.

Press Push Button.

When Wi-Fi Direct On? is displayed, press On to accept.

To cancel, press Off.

Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when

Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed.

Press OK on your Brother machine. This will start the Wi-Fi Direct setup.

To cancel, press

Do one of the following:



When your Brother machine is the G/O, connect your mobile device to the machine directly.



When your Brother machine is not the G/O, it will display available device names with which to

configure a Wi-Fi Direct network. Choose the mobile device to which you want to connect and press

OK. Search for available devices again by pressing Rescan.

If your mobile device connects successfully, the machine displays the message Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your

mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from

the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 14.

If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi

Direct network.