Fujitsu ETERNUS DX8100 S2 Kullanıcı Kılavuzu - Sayfa 28
Depolama Fujitsu ETERNUS DX8100 S2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu ETERNUS DX8100 S2 35 sayfaları. Disk storage system settings
Ayrıca Fujitsu ETERNUS DX8100 S2 için: Kullanıcı Kılavuzu (42 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Chapter 9
Setting Up the Server to Recognize the Logical Units
9.1
Displaying the Recognized Logical Units
"cat" command for LUN display
•
Use the "cat" command to display the "/proc/scsi/scsi" file, which contains a list of recognized SCSI devices.
Check each path of the allocated LUNs.
The following shows an example:
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id:
Vender: FUJITSU
Type:
Host: scsi0 Channel: 00 Id:
Vender: SDR
Type:
Host: scsi1 Channel: 00 Id:
Vender: SEAGATE
Type:
Host: scsi2 Channel: 00 Id:
Vender: FUJITSU
Type:
Host: scsi2 Channel: 00 Id:
Vender: FUJITSU
Type:
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
04 Lun: 00
Model: MAP3735NC
Direct-Access
08 Lun: 00
Model: GEM318
Processor
05 Lun: 00
Model: DAT
Sequential-Access
00 Lun: 00
Model: ETERNUS_DX400
Direct-Access
00 Lun: 01
Model: ETERNUS_DX400
Direct-Access
Copyright 2013 FUJITSU LIMITED
Rev: 5207
ANSI SCSI revision: 03
Rev: 0
ANSI SCSI revision: 02
9SP40-000
Rev: 9M38
ANSI SCSI revision: 03
Rev: 0000
ANSI SCSI revision: 05
Rev: 0000
ANSI SCSI revision: 05
28
P3AM-3842-12ENZ0