Fujitsu ETERNUS DX8700 S2 Kullanıcı Kılavuzu - Sayfa 12
Depolama Fujitsu ETERNUS DX8700 S2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu ETERNUS DX8700 S2 42 sayfaları. Disk storage system settings
Ayrıca Fujitsu ETERNUS DX8700 S2 için: Kullanıcı Kılavuzu (35 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Chapter 3
Notes
Note the following issues when connecting the ETERNUS DX Disk storage system to a server.
3.1
Connection Notes
3.1.1
For VMware vSphere
Dedicated IP addresses must be allocated to the iSCSI LAN. An IP address must be allocated to each VMkernel
that corresponds to an iSCSI Initiator, and a LAN card and VMkernel must be connected via a virtual switch.
●
For the ETERNUS DX Disk storage system
For example, a total of four IP addresses are required by the following iSCSI connection setup.
Example connection configuration
VMkernel (iSCSI Software Initiator)
IP address (1)
IP address
for iSCSI port (3)
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
VMware ESX server
LAN card
LAN switch
ETERNUS DX Disk storage system
Copyright 2013 FUJITSU LIMITED
VMkernel (iSCSI Software Initiator)
IP address (2)
LAN card
LAN switch
IP address
for iSCSI port (4)
12
®
ESX
P3AM-3412-13ENZ0