Fujitsu ETERNUS DX8700 S2 Kullanıcı Kılavuzu - Sayfa 32
Depolama Fujitsu ETERNUS DX8700 S2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu ETERNUS DX8700 S2 42 sayfaları. Disk storage system settings
Ayrıca Fujitsu ETERNUS DX8700 S2 için: Kullanıcı Kılavuzu (35 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Chapter 6
Setting Up the VMware ESX Server
6.2
For VMware Infrastructure 3
6.2.3
Creating the Virtual Switches
Add two virtual switches (vSwitch) for iSCSI to VMware ESX.
Define two virtual network port types ("Service Console" and "VMkernel") for the added vSwitch.
Also assign IP addresses on the same subnet to the defined Service Console and VMkernel.
6.2.3.1
Adding a Service Console
1
Select the [Configuration] tab on VMware Infrastructure Client and click [Add Networking].
2
Select [Service Console] and click the [Next] button.
3
Select the checkbox of the target network adapter and click the [Next] button.
4
Check the [Service Console] details, set an arbitrary VLAN ID, IP address, and subnet mask, and click the
[Next] button.
5
Check the [Service Console] IP address and click the [Finish] button.
Confirm that the virtual switch (vSwitch1) has been created as follows.
6
Repeat
Step 1
6.2.3.2
Adding a VMkernel
1
Select the [Configuration] tab on VMware Infrastructure Client and select the target virtual switch' s
[Properties].
2
Click [Add].
3
Select the [VMkernel] radio button, and click the [Next] button.
4
Confirm that the VMkernel is displayed, set the IP address (an optional VLAN ID may be set, as necessa-
ry), and click the [Next] button.
5
Confirm the settings shown on the confirmation screen and click the [Finish] button.
A message about Gateway settings appears.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
through
Step 5
to add Service Console to vSwitch2.
32
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0