Fujitsu ETERNUS DX8700 S2 Kullanıcı Kılavuzu - Sayfa 35
Depolama Fujitsu ETERNUS DX8700 S2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu ETERNUS DX8700 S2 42 sayfaları. Disk storage system settings
Ayrıca Fujitsu ETERNUS DX8700 S2 için: Kullanıcı Kılavuzu (35 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Chapter 6
Setting Up the VMware ESX Server
6.2
For VMware Infrastructure 3
9
Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage system is displayed as
follows and click [Close].
10
If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, repeat the IP address addi-
tion process for each iSCSI port. (Repeat
6.2.5
Setting CHAP Authentication
For VMware ESX connections, the ETERNUS DX Disk storage system uses a one-way CHAP authentication to
authenticate the Software Initiator access.
Perform the following settings to enable CHAP authentication.
1
Select the [Configuration] tab on VMware Infrastructure Client and select [Storage Adapters].
2
Select the target iSCSI Software Adapter and click [Properties].
3
Select the [CHAP Authentication] tab and click [Configure].
4
Select the [Use the following CHAP credentials] radio button.
5
Set arbitrary user name during the CHAP authentication.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
Step 7
through
Step
35
Copyright 2013 FUJITSU LIMITED
9.)
®
ESX
P3AM-3412-13ENZ0