Fujitsu Eternus DX90 S2 Yapılandırma Kılavuzu Sunucu Bağlantısı - Sayfa 9

Depolama Fujitsu Eternus DX90 S2 için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu Sunucu Bağlantısı indirin. Fujitsu Eternus DX90 S2 13 sayfaları. Server connection. (fibre channel) for aix
Ayrıca Fujitsu Eternus DX90 S2 için: Kullanıcı Kılavuzu (35 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Manuel (18 sayfalar), Kurulum Kurulumu (20 sayfalar), Donanım Kurulumu (23 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (15 sayfalar), Yapılandırma Kılavuzu (38 sayfalar)

Sayfayı Yazdır

Fujitsu Eternus DX90 S2 Yapılandırma Kılavuzu Sunucu Bağlantısı

Chapter 2

Setting Up the ETERNUS DX

2.1

Common Settings

2.1.3

Setting the Host Responses

The host response parameters for the ETERNUS DX must be set to match the way the server processes the

responses to requests from the ETERNUS DX. Setting of the host response must be done before connecting

the ETERNUS DX to the server.

Set the parameters that are described below for each OS.

Retain the default values for all of the parameters that are not described below.

Since "Windows EMPD", "Linux EMPD", "Solaris EMPD", or "Others" cannot be selected after applying the

latest firmware, select "Default" for the Host Response setting.

Note that these items are displayed as the existing setting, but do not need to be changed.

Table 2.2 Host response settings

Solaris

Windows

VMware ESX

Linux

2.1.4

Setting the CA Port Groups

Create new SAS port groups and register the ports as members of the groups. A SAS port group is a group of

SAS-CA type ports that are connected to the specified host group. Configure the host affinity setting for each

SAS port group.

Conditions

When all of the following con-

ditions are met

The OS standard Multipath

•

Driver (MPxIO) is used

The Multipath Diagnostic

•

Program (or Enhanced Sup-

port Facility 5.1 or later) is

installed

When MPxIO that is different

from the above is used

When the ETERNUS Multipath

Driver or Symantec Storage

Foundation is used

–

For SUSE Linux Enterprise

Server 10

Other cases

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

Host response selec-

Parameter

tion

None

Reservation Conflict Re-

sponse for Test Unit

(Create a new host re-

Ready

sponse)

Sense Data Conversion

Solaris MPxIO

–

Default

–

Default

–

None

Sense Data Conversion

(Create a new host re-

sponse)

Default

–

Setting value

Conflict

4/*/* g 6/*/*

B/*/* g 6/*/*

–

b/c1/01 g 6/c1/01

–

P3AM-5352-11ENZ0