Fujitsu ETERNUS HX Series Hızlı Başlangıç Kılavuzu - Sayfa 4
Depolama Fujitsu ETERNUS HX Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Fujitsu ETERNUS HX Series 8 sayfaları. Installing a cisco nexus 9336c-fx2 switch and pass-through panel in a cabinet, for cisco nexus 9336c-fx2 switches
Ayrıca Fujitsu ETERNUS HX Series için: Yükleme (9 sayfalar)
Sayfayı Yazdır
You can use the default HBA settings for the initiator HBA in the host, but you must configure the target
HBA on the storage system for a media type of loop as shown in the example here:
4a:
ONLINE <ADAPTER UP>
host address
portname 50:0a:09:81:97:c9:7e:5c
50:0a:09:80:87:c9:7e:5c
mediatype loop speed auto
Note: Direct FC configurations are not supported with clustered Data ONTAP.
Note: There is no setting required with clustered Data ONTAP.
5. Confirm that the host and the storage system can communicate.
Task 2: Install and set up the Host Utilities
To install and set up the Host Utilities, you must get the software package for your Host Utilities environment
and the software package for the SAN Toolkit. After you install these packages, you might need to perform
additional configuration steps for your environment.
You must be logged on as root to install or uninstall the Host Utilities.
Note: (PowerVM vSCSI environments) If you are using PowerVM with vSCSI, you must switch into the OEM
setup shell to install the Host Utilities on the VIO server:
1. Log on to the host as padmin.
2. Enter the command: oem_setup_env
Complete the following steps to get, install, and set up the Host Utilities:
1. Download the compressed file containing the packages from the DVD included in the Product.
2. Uncompress the file and get the SAN Toolkit software package (Fujitsu.SAN_toolkit ) for all
environments and the host settings software package for your environment:
Host Utilities environment
AIX MPIO, PowerVM
SAN Tool Kit
You can use the zcat and tar commands to uncompress the file and extract the software; for example:
zcat fujitsu_aix_host_utilities_6.0.tar.Z | tar -xvf -
3. Install or upgrade the existing Host Utilities SAN Toolkit software package and the host settings software
package that you extracted.
From the directory containing the extracted software packages, use one of the following methods to install
the two software packages:
• SMIT
Use the smitty install command to start this program. Go to the Software Installation and
Maintenance screen and choose the Install and Update Software option.
• The command installp -aXYd FileSet_Path_Name
Regardless of which method you use, you must execute the steps twice to install both the SAN Toolkit
software package and the host settings software package.
(PowerVM NPIV environments) If you have a PowerVM NPIV environment running FC, you must install the
SAN Toolkit on each VIO client. Doing this lets you run the sanlun utility on each VIO client.
Note: If you have a PowerVM vSCSI environment, the Host Utilities is only installed on the VIO server and
not the VIO client.
4. (FC environments) Enable AIX Fast I/O Failure by setting the fc_err_recov parameter to fast_fail.
PTP
Fabric
nodename
Software package
MPIO/
Fujitsu.MPIO_Host_Utilities_Kit
SAN_Tool_Kit/Fujitsu.SAN_toolkit
| AIX Host Utilities 6.0 Quick Start Guide |
4