AEG OKO-LAVAMAT BELLA2100 Talimat Kitapçığı - Sayfa 33

Yıkayıcı AEG OKO-LAVAMAT BELLA2100 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. AEG OKO-LAVAMAT BELLA2100 45 sayfaları. Aeg the environmentally friendly washing machine

Sayfayı Yazdır

Problem

The machine vibrates or is

noisy

The door will not open

Spinning starts late or the

machine does not spin

Possible cause

The transit bolts have

not been removed.

The feet have not been

adjusted.

There is little laundry in

the drum.

The programme is still

running and the drum

is turning.

The water level is above the

bottom edge of the door.

The machine is heating the Wait until the end of the

water.

The unbalance detection

device that prevents

excessive vibration during

spinning has cut in.

Something not working?

Solution

Check that the machine

has been unpacked as

described in the Installation

section.

Carefully level the machine.

Correct operation of the

machine is not affected.

Wait until the end of the

programme before opening

the door.

Before opening the door,

the water must be emptied

out.

heating phase.

If the laundry is not evenly

distributed inside the drum

at the beginning of the

spin cycle, the machine

detects this and tries to

redistribute it more evenly

by means of a few drum

rotations.

Only when the laundry is

more evenly distributed

will the spin cycle be

performed, at a lower speed,

if the laundry is not evenly

distributed.

If, after about 10 minutes,

the laundry is still tangled,

the machine will not spin.

Therefore, if the laundry is

still wet at the end of the

cycle, it is advisable to

redistribute it manually

inside the drum and to

select the spin programme.