Fujitsu ETERNUS8000 1100 Manuel - Sayfa 18

Depolama Fujitsu ETERNUS8000 1100 için çevrimiçi göz atın veya pdf Manuel indirin. Fujitsu ETERNUS8000 1100 28 sayfaları. Disk storage systems (fibre channel) for oracle solaris
Ayrıca Fujitsu ETERNUS8000 1100 için: Manuel (21 sayfalar), Sunucu Bağlantı Kılavuzu (25 sayfalar), Sunucu Bağlantı Kılavuzu (32 sayfalar), Bağlantı Kılavuzu (19 sayfalar)

Sayfayı Yazdır

Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server

7.2 Setting Up the Server

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Example:

CM0Port0: 192.1.1.120, CM1Port0: 192.1.1.121

# iscsiadm add discovery-address 192.1.1.120

# iscsiadm add discovery-address 192.1.1.121

Enable the connection to the iSCSI Target.

Enable the connection to the ETERNUS Disk storage system that is to be the iSCSI Tar-

get.

# iscsiadm modify discovery -t enable

Create an iSCSI device link.

# devfsadm -i iscsi

Check the ETERNUS Disk storage system.

Check the state of the ETERNUS Disk storage system disks using the "format" command.

Example: ETERNUS2000

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

1. c6t25d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,0

2. c6t26d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,1

3. c6t27d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,0

4. c6t28d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,1

Specify disk (enter its number): Specify disk (enter its number):

End of procedure