Fujitsu ETERNUS8000 800 Manuel - Sayfa 10

Depolama Fujitsu ETERNUS8000 800 için çevrimiçi göz atın veya pdf Manuel indirin. Fujitsu ETERNUS8000 800 21 sayfaları. Disk storage systems (fibre channel) for oracle solaris
Ayrıca Fujitsu ETERNUS8000 800 için: Manuel (28 sayfalar), Sunucu Bağlantı Kılavuzu (25 sayfalar), Sunucu Bağlantı Kılavuzu (32 sayfalar), Bağlantı Kılavuzu (19 sayfalar)

Sayfayı Yazdır

Chapter 3 Setting Up MPxIO

3.1 Solaris 10 OS

3.1.4

Editing the "/kernel/drv/scsi_vhci.conf" Settings

Edit the "/kernel/drv/scsi_vhci.conf" file to enable the auto-failback function.

Check that an "auto-failback="enable";" line exists, enabling the auto-failback function.

Otherwise, add this line or change its value to "enable".

# Use is subject to license terms.

#pragma ident

name="scsi_vhci" class="root";

# Load balancing global configuration: setting load-balance="none" will cause

# all I/O to a given device (which supports multipath I/O) to occur via one

# path.

# to be used in turn.

load-balance="round-robin";

# Automatic failback configuration

# possible values are auto-failback="enable" or auto-failback="disable"

auto-failback="enable";

# For enabling MPxIO support for 3rd party symmetric device need an

# entry similar to following in this file. Just replace the "SUN

# part with the Vendor ID/Product ID for the device, exactly as reported by

# Inquiry cmd.

# device-type-scsi-options-list =

# "SUN

# symmetric-option = 0x1000000;

3.1.5

Reconfiguring and Restarting the Server

Reconfigure and reboot the server to effect the new settings.

The ETERNUS Disk storage system can be reconfigured by creating the "/reconfigure" file and

rebooting the server.

# touch /reconfigure

# /usr/sbin/shutdown -y -g0 -i6

P3AM-2722-04ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

"@(#)scsi_vhci.conf

Setting load-balance="round-robin" will cause each path to the device

Check that auto-failback is enabled.

SENA", "symmetric-option";

1.9

04/08/26 SMI"

SENA"