Fujitsu ETERNUS8000 800 Manuel - Sayfa 18
Depolama Fujitsu ETERNUS8000 800 için çevrimiçi göz atın veya pdf Manuel indirin. Fujitsu ETERNUS8000 800 21 sayfaları. Disk storage systems (fibre channel) for oracle solaris
Ayrıca Fujitsu ETERNUS8000 800 için: Manuel (28 sayfalar), Sunucu Bağlantı Kılavuzu (25 sayfalar), Sunucu Bağlantı Kılavuzu (32 sayfalar), Bağlantı Kılavuzu (19 sayfalar)
Chapter 3 Setting Up MPxIO
>
3.3 Solaris 8 OS
# Copyright (c) 2001 by Sun Microsystems, Inc.
# All rights reserved.
#
#pragma ident
#
name="scsi_vhci" class="root";
#
# mpxio global enable/disable switch: setting mpxio-disable="no" will activate
# I/O multipathing; setting mpxio-disable="yes" disables this feature (do
# not remove this property).
#
mpxio-disable="no";
#
# Load balancing global configuration: setting load-balance="none" will cause
# all I/O to a given device (which supports multipath I/O) to occur via one
# path.
# to be used in turn.
#
load-balance="round-robin";
#
# Force load driver to support hotplug activity (do not remove this property).
#
ddi-forceattach=1;
# Automatic failback configuration
# possible values are auto-failback="enable" or auto-failback="disable"
#
# This functionality requires patch 113039-02 (or higher).
#
auto-failback="enable";
#
# For enabling MPxIO support for 3rd party symmetric device need an
# entry similar to following in this file. Just replace the "SUN
# part with the Vendor ID/Product ID for the device, exactly as reported by
# Inquiry cmd.
#
# This functionality requires patch 113039-02 (or higher).
#
# device-type-scsi-options-list =
# "SUN
#
# symmetric-option = 0x1000000;
#
device-type-scsi-options-list =
"FUJITSU E8000", "symmetric-option";
symmetric-option = 0x1000000;
3.3.4
Reconfiguring and Restarting the Server
Reconfigure and restart the server to effect the new settings.
The ETERNUS Disk storage system can be reconfigured by creating the "/reconfigure" file and
rebooting the server.
# touch /reconfigure
# /usr/sbin/shutdown -y -g0 -i6
P3AM-2722-04ENZ0
ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
"@(#)scsi_vhci.conf
Check that mpxio-disable is set to "no".
Setting load-balance="round-robin" will cause each path to the device
Check that auto-failback is enabled.
SENA", "symmetric-option";
18
1.3
01/08/22 SMI"
Check that the symmetric-option
is enabled for the ETERNUS8000, in this case.
SENA"
End of procedure
Copyright 2010 FUJITSU LIMITED