Fujitsu ETERNUS8000 model 700 Manuel - Sayfa 18

Depolama Fujitsu ETERNUS8000 model 700 için çevrimiçi göz atın veya pdf Manuel indirin. Fujitsu ETERNUS8000 model 700 28 sayfaları. Disk storage systems (fibre channel) for oracle solaris
Ayrıca Fujitsu ETERNUS8000 model 700 için: Sunucu Bağlantı Kılavuzu (25 sayfalar), Sunucu Bağlantı Kılavuzu (32 sayfalar), Bağlantı Kılavuzu (19 sayfalar)

Fujitsu ETERNUS8000 model 700 Manuel
Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server
>
7.2 Setting Up the Server
4
5
6
P3AM-4182-03ENZ0
Server Connection Guide (iSCSI) for Oracle Solaris
Example:
CM0Port0: 192.1.1.120, CM1Port0: 192.1.1.121
# iscsiadm add discovery-address 192.1.1.120
# iscsiadm add discovery-address 192.1.1.121
Enable the connection to the iSCSI Target.
Enable the connection to the ETERNUS Disk storage system that is to be the iSCSI Tar-
get.
# iscsiadm modify discovery -t enable
Create an iSCSI device link.
# devfsadm -i iscsi
Check the ETERNUS Disk storage system.
Check the state of the ETERNUS Disk storage system disks using the "format" command.
Example: ETERNUS2000
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
1. c6t25d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>
/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,0
2. c6t26d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>
/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,1
3. c6t27d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>
/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,0
4. c6t28d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>
/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,1
Specify disk (enter its number): Specify disk (enter its number):
18
End of procedure
Copyright 2010 FUJITSU LIMITED