Brother MFC-8910DW Kullanıcı Kılavuzu - Sayfa 8

Yazdırma Sunucusu Brother MFC-8910DW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother MFC-8910DW 23 sayfaları. Quick setup guide - english
Ayrıca Brother MFC-8910DW için: Manuel (30 sayfalar), Manuel (36 sayfalar), Ağ Kılavuzu (29 sayfalar), Manuel (27 sayfalar), Hızlı Kurulum Kılavuzu (45 sayfalar), Hızlı Kurulum Kılavuzu (45 sayfalar), Ürün Güvenlik Kılavuzu (23 sayfalar)

DO NOT inhale the toner powder. If toner powder is inhaled, please follow these steps

immediately:

• Move to an area with plenty of fresh air.

• Gargle and rinse your mouth out with plenty of water.

• If you develop a cough or any other symptoms soon after inhaling the toner, consult your

doctor immediately.

If toner powder is swallowed, rinse your mouth immediately and drink plenty of fresh water to

dilute the toner. Then consult your doctor immediately thereafter. For more safety information

regarding the toners used in your product, please visit the following web address to read the

Safety Data Sheets http://sds.brother.co.jp/sdsapp/index.html, which include important

information about the chemical composition of the toners and the precautions to take in case of

overexposure to toner.

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

Wait at least 10 minutes for the product to cool down before you touch the internal parts of the

product.

(MFC and DCP only)

When moving the product, grasp the side handholds firmly from the front of the product. The

side handholds are located under the scanner. DO NOT carry the product by holding it at the

bottom.