AEG PNC914550488 Kullanıcı Kılavuzu - Sayfa 36

Yıkayıcı AEG PNC914550488 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG PNC914550488 44 sayfaları.

Sayfayı Yazdır

www.aeg.com

Problem

The appliance does not

drain the water.

The spin phase does not

operate or the washing

cycle lasts longer than

usual.

There is water on the

floor.

You cannot open the ap-

pliance door.

The appliance makes an

unusual noise and vi-

brates.

The programme duration

increases or decreases

during programme exe-

cution.

Possible solution

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the drain filter is not clogged. Clean the fil-

ter, if necessary. Refer to "Care and cleaning".

• Make sure that the connection of the drain hose is correct.

• Set the drain programme if you set a programme without

drain phase.

• Set the drain programme if you set an option which ends

with water in the tub.

• Set the spin programme.

• Make sure that the drain filter is not clogged. Clean the fil-

ter, if necessary. Refer to "Care and cleaning".

• Adjust manually the items in the tub and start the spin

phase again. This problem may be caused by balance prob-

lems.

• Make sure that the couplings of the water hoses are tight

and there is not water leakages.

• Make sure that the water inlet hose and the drain hose have

no damages.

• Make sure you use the correct detergent and the correct

quantity of it.

• Make sure that a washing programme that ends with water

in tub, has been selected.

• Make sure that the washing programme is finished.

• Set the drain or the spin programme if there is water in the

drum.

• Make sure that the appliance receives electrical power.

• This problem may be caused by a failure of the appliance.

Contact the Authorised Service Centre.

If you need to open the door, please read carefully "Emer-

gency door opening".

• Make sure the levelling of the appliance is correct. Refer to

"Installation instruction".

• Make sure that the packaging and/or the transit bolts are

removed. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

• The ProSense function is able to adjust the programme du-

ration according to the type and the laundry load size. Re-

fer to "The ProSense load detection" in "Daily Use" chap-

ter.