Fujitsu M2488 Kullanım Kılavuzu

Depolama Fujitsu M2488 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Fujitsu M2488 4 sayfaları.

IBM RISC SYSTEM 6000 RUNNING AIX 3.2

FOREWORD

This application note describes the procedure to use when attaching to an IBM RISC System 6000 running AIX 3.2.

Instructions cover installing the M2488 tape drive hardware and conﬁguring the system to communicate with the

M2488. The system manuals provide detailed descriptions of many of the operations performed in this application

note.

PROCEDURE

You must be superuser to perform the operations in this procedure.

Displays are presented in this typeface: /etc/passwd

User entries are presented in this typeface: boot

STEP

ACTION

Shut down the IBM RS/6000 and power the unit off.

Ensure that the M2488 is properly terminated and connect the M2488 tape drive to the RS/6000's SCSI

controller. The M2488 Cartridge Tape Drive Product Guide (part number CG00000-0115xx) may be

useful for conﬁguration of the M2488. Set the SCSI target ID to either 4 or 5. Address 4 will be used for

the examples in this application note.

Power on the M2488 and wait for the power cycle to complete.

Turn the RS/6000 AC power on and reboot the system. The key should be set to the "Normal" position.

Log on as root.

During the boot sequence, the system adds the M2488 to its customized conﬁguration table as a deﬁned

tape drive. Verify that the system has added the M2488.

From the aixterm command line, type smit, then choose:

•

CONNECTING THE M2488 TO AN

Select Devices

Select Tape Drive

Select List All Deﬁned Tape Drives

TAPE APPLICATION NOTE

CG00000-016401