AEG ProSense LTR63ECO Kullanıcı Kılavuzu - Sayfa 16
Yıkayıcı AEG ProSense LTR63ECO için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG ProSense LTR63ECO 36 sayfaları.
Sayfayı Yazdır
8.3 Temperatuur
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Set this option to change the default
temperature.
The indicator
= cold water of the set
temperature comes on (the appliance does
not heat the water).
8.4 Centrifugeren
When you set a programme, the appliance
automatically sets the maximum spin speed
allowed.
Touch repeatedly this button to:
Decrease the spin speed
Activate the Spoelstop option
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The door stays locked and the drum turns
regularly to reduce creasing.
• You must drain the water to unlock the lid.
• If you touch the Start/Pauze button, the
appliance performs the spinning phase
and drains the water.
The appliance empties the water out
automatically after 18 hours
approximately.
Activate the No Spin option
• Set this option to deactivate all spin
phases. Only the drain phase is available.
• The related indicator comes on.
• Set this option for very delicate fabrics.
• The rinses phase uses more water for
some washing programmes.
The spin speed can be reduce.
16
ENGLISH
8.5 Extra
Press this button repeatedly to activate one of
the available options.
• Vlekken
Select this option to add an anti-stain
phase to a programme in order to treat
heavily soiled or stained laundry with stain
remover.
Pour the stain remover into
compartment . The stain remover will be
added in the appropriate phase of the
washing programme.
This option can increase the
programme duration. This option is
not available with a temperature lower
than 40 °C.
• Voorwas
Use this option to add a prewash phase at
30 °C before the washing phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust , mud and other solid particles.
This option can increase the
programme duration.
The relevant indicator comes on.
8.6 Tijd besparen
This option may be advisable to shorten the
washing programme.
Use this option for items with normal or light
soil or items to refresh.
Touch this button once to decrease the
duration.
In case of smaller load, touch this button
twice to set an extra quick programme.
The indicator of the option and the indicator
of the set value are on.
8.7 Startuitstel
With this option you can delay the start of a
programme in a more convenient time.
Touch repeatedly the button to set the
required delay. The time increases by steps