AEG ProSteam LR73CW86 Kullanıcı Kılavuzu - Sayfa 15

Yıkayıcı AEG ProSteam LR73CW86 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG ProSteam LR73CW86 44 sayfaları.

Sayfayı Yazdır

AEG ProSteam LR73CW86 Kullanıcı Kılavuzu

8. DIAL AND BUTTONS

8.1 Aan/Uit - Marche/Arrêt

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.

As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.

For more details, refer to Stand-by

paragraph in Daily Use chapter.

8.2 Introduction

The options/functions are

not selectable with all

washing programmes.

Check the compatibility

between options/functions

and washing programmes in

the "Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

Make sure the screen and

touch buttons are always

clean and dry.

8.3 Temp.

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

and

the water.

8.4 Centrifugeren - Essorage

When you set a programme, the

appliance automatically sets the default

spin speed.

Touch repeatedly this button to:

, the appliance does not heat

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the Rinse Hold option.

The final spin is not performed. The

water of the last rinse is not drained

out to prevent the fabrics from

creasing. The washing programme

ends with water in the drum.

The display shows the indicator

The door stays locked and the drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

If you touch the Start/Pauze - Départ/

Pause

button, the appliance

performs the spinning phase and

drains the water.

The appliance empties

the water out

automatically after 18

hours approximately.

• Activate the Extra Silent option.

The intermediate and the final

spinning phases are suppressed and

the programme ends with water in the

drum. This helps to reduce creasing.

The display shows the indicator

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are

available. In some programmes the

rinses are performed with more water.