Brother QL-1060N Yazılım Kullanıcı Kılavuzu - Sayfa 34

Yazdırma Sunucusu Brother QL-1060N için çevrimiçi göz atın veya pdf Yazılım Kullanıcı Kılavuzu indirin. Brother QL-1060N 48 sayfaları. Label printer
Ayrıca Brother QL-1060N için: Ağ Kullanıcı Kılavuzu (42 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Yazılım Kullanıcı Kılavuzu (40 sayfalar), Ağ Kullanıcı Kılavuzu (48 sayfalar), Ağ Kullanıcı Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kullanıcı Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (24 sayfalar)

• If multiple QL printers are connected to the network, select the QL printer to print with. A list of

the QL printers connected to the network can be displayed by clicking

[Printer Setup...]. You can find the desired printer in the list from its IP address.

• The IP address of QL printers can be checked by printing the printer set-up information. Press

and hold down the Cut button when the power is on to print the printer set-up information.

• We recommend that you set the printer location using BRAdmin because it enables you to view

the printer in the list.

Label View

Display

This label view is displayed when the software is started. The width of tape currently

set is displayed on the left of label image. When "Auto" is shown on the right, the

length of tape is automatically adjusted to the length of text.

You can drag the label border to manually change the length and width of the label.

Move the pointer to the label area's border. When the blue line appears, drag to the

desired length or width.

You can adjust the size of the P-touch Editor Lite LAN window. Simply move the

pointer over an edge of the P-touch Editor Lite LAN window and drag to adjust the

size once the pointer changes to an arrow.

Guidelines are sometimes displayed when moving objects. They are shown when

the object is aligned at the left, right, top, or bottom edge of Printable area, or in the

center. In the illustration to the left, the guidelines indicate that the object is centered

at the top edge of the tape.

Inserted text boxes, images, and frames are treated as objects. Objects are

surrounded by handles (indicated by eight blue points).

Indicates that an object is selected.

The pointer changes to an arrow when moved over a handle. You can change the

size of the object by dragging.

You can move objects by dragging when the pointer is a crosshair. For text objects,

the pointer only changes to a crosshair over the border of the object.

Function

and then clicking