Brother CP-1800 Kullanıcı Kılavuzu - Sayfa 19

Yazılım Brother CP-1800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother CP-1800 27 sayfaları. Copyboard
Ayrıca Brother CP-1800 için: Kullanıcı Kılavuzu (19 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Parça Referans Listesi (18 sayfalar)

Adjusting the scanner

Before adjusting the print contrast, check that the roll paper is installed,

and that both the ERROR and PAPER indicator lights are off.

With your hand, lightly scroll the writing surface down approx. 11.8 in. (30

cm), and then clean the writing surface well.

Hold down both d and f until the PAPER indicator begins flashing. The

writing surface will scroll to its correct starting position.

If the ERROR indicator lights up or is flashing, turn off the unit. Make sure

the roll paper is installed, turn the power on and repeat this procedure

from step

Wait until the PAPER indicator goes off. If a page is printed with the "ERR =

XX" message, repeat this procedure from step

If the problem persists, clean the scanner as explained in Cleaning the

scanner on page 18.

Cleaning the black bar

Turn off the unit, unplug the AC adaptor, and then position the copyboard

so that it is standing up mounted on a partition or the wall.

Open the paper compartment by pulling up its latch.

Using a lint-free cloth that is either dry or lightly moistened with isopropyl

alcohol, gently wipe the black bar while turning the gear at the right.

4. Maintenance