AEG ARCTIS Kullanım Talimatları Kılavuzu - Sayfa 8

Installation

Building-in

See installation instructions supplied.

Please check whether, after installing your appliance and especially

after rehingeing the door, the door seal seals right round. An untight

door seal may lead to heavy frosting and thereby to a higher power

consumption (see also „What to do if...").

A correctly installed, earthed socket is required for the electrical sup-

ply. The supply must have a fuse rating of at least 10 Amps. If the

socket is not accessible once the appliance is built in, the electrical

installation must include suitable means of isolating the appliance

from the mains (e.g. a fused spur).

Before initial start-up, refer to the appliance rating plate to ascertain

if supply voltage and current values correspond with those of the

mains at the installation location.

e.g.: AC 220 ... 240 V 50 Hz or

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

The mains cable may only be changed by a qualified electrician or

competent person. If your appliance needs repairing, please contact

your local Customer Care Department.

220 ... 240 V ~50 Hz