AEG FAVORIT 66602VI0P Kullanıcı Kılavuzu - Sayfa 10

Buzdolabı AEG FAVORIT 66602VI0P için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG FAVORIT 66602VI0P 20 sayfaları.

Sayfayı Yazdır
10
www.aeg.com
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
the setting.
4. Press the on/off button to confirm
the setting.
6.4 Use of rinse aid and multi-
tablets
The factory setting of the rinse aid
dispenser is with the dispenser activated.
This means that the rinse aid dispenser
always releases rinse aid.
It is possible to deactivate the rinse aid
dispenser, in this case the dispenser will
not release rinse aid only if the option
Multitab is activated.
If the dispenser is deactivated and you
do not select the option Multitab, the
dispenser will release rinse aid.
The use of the option Multitab with the
rinse aid dispenser deactivated may not
give satisfying drying results.
When the rinse aid dispenser is
deactivated, the rinse aid indicator is
always off when the option Multitab is
activated.
How to deactivate the rinse
aid dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
off.
,
continues to
= level 4.
– The levels of rinse aid are
from 0A to 6A.
– Level 0 = no rinse aid is
released.
again and again to change
,
,
.
,
and
go
3. Press
deactivated.
4. Press the on/off button to confirm
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
3. Press
and
until
4. Press the on/off button to confirm
and
and
go
• The indicator
flash.
• The display shows the current
setting:
= the rinse aid
dispenser is activated (factory
setting).
to change the setting.
= the rinse aid dispenser is
the setting.
hold simultaneously
the indicators
,
start to flash and the display is blank.
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting:
= Acoustic signal off.
to change the setting.
= Acoustic signal on.
the setting.
continues to
and
until
,
and
,
and
go
continues to