AEG OKO SANTO SANTO Kullanım Talimatları Kılavuzu - Sayfa 8

Buzdolabı AEG OKO SANTO SANTO için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AEG OKO SANTO SANTO 28 sayfaları. Built-in refrigerators

Sayfayı Yazdır

Remove transport safeguard

The appliance and the interior fittings are protected for transport.

1. Remove all adhesive tape and packing pieces from the interior of the

appliance.

You can remove any remnants of adhesive using white spirit.

Installation

Installation Location

The appliance should be set up in a well ventilated, dry room.

Energy use and efficient performance of the appliance is affected by

the ambient temperature.

The appliance should therefore

– not be exposed to direct sunlight;

– not be installed next to radiators, cookers or other sources of heat;

– only be installed at a location whose ambient temperature corre-

sponds to the climate classification, for which the appliance is

designed.

The climate classification can be found on the serial plate, which is

located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for

each climate classification:

Climate classification

If installation next to a source of heat is unavoidable, the following

minimum clearances must be maintained at the sides of the appliance:

– for electric cookers 3 cm;

If these clearances cannot be maintained a heat insulating pad is

required between the cooker and the refrigeration appliance.

If the refrigeration appliance is installed next to another refrigerator or

freezer a clearance of 5 cm at the sides is required, in order to prevent

the formation of condensation on the outside of the appliance.

for an ambient temperature of

+10 to +32 °C

+16 to +32 °C

+18 to +38 °C

+18 to +43 °C