Brother MFC 5890CN - Color Inkjet - All-in-One Hızlı Kurulum Kılavuzu - Sayfa 7
Yazılım Brother MFC 5890CN - Color Inkjet - All-in-One için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC 5890CN - Color Inkjet - All-in-One 31 sayfaları. Brother mfc-5890cn: quick start
Ayrıca Brother MFC 5890CN - Color Inkjet - All-in-One için: Broşür ve Teknik Özellikler (9 sayfalar), Hızlı Kurulum Kılavuzu (34 sayfalar)
Sayfayı Yazdır
6
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Yes
Are you using the voice message
function of an external telephone
answering device?
No
Do you want the machine to
answer fax and telephone calls
automatically?
Yes
No
Yes
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Receive Mode.
d
Press d or c to choose the receive mode.
Press OK.
e
Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User's Guide.
No
Fax Only
Your machine
automatically answers
every call as a fax.
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the telephone
will ring for you to pick
up the call.
Manual
You control the
telephone line and must
answer every call
yourself.
External TAD
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
printed.
7
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press a or b to choose General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
e
Press d or c to choose Light, Med or Dark.
Press OK.
f
Press Stop/Exit.
Note
You can also adjust the angle of the display by
lifting it.
8
Set the date and time
The machine displays the date and time, and if you
set up the station ID, it will add it to each fax you send.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Date&Time.
Press OK.
d
Enter the last two digits of the year on the dial
pad, and then press OK.
Date&Time
Year:20
08
MENU
(e.g. Enter 0 8 for 2008.)
e
Repeat for Month and Day, and Hours and
Minutes in 24-hour format.
f
Press Stop/Exit.
Input & Press
OK
7