Brother MFC 990cw - Color Inkjet - All-in-One Kullanıcı Kılavuzu - Sayfa 21
Yazılım Brother MFC 990cw - Color Inkjet - All-in-One için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother MFC 990cw - Color Inkjet - All-in-One 43 sayfaları. Quick setup guide - spanish
Ayrıca Brother MFC 990cw - Color Inkjet - All-in-One için: Talimatlar (2 sayfalar), (İngilizce) Hızlı Yapılandırma Kılavuzu (50 sayfalar)
Sayfayı Yazdır
e
Do one of the following:
If you want to store the number,
press a or b to choose
Set Tel-Index.
Press Menu/OK.
(See Storing Tel-Index numbers
from the Caller ID
history on page 12.)
If you want to delete the number,
press a or b to choose Delete.
Press Menu/OK.
Then, confirm the Delete by
pressing 1.
If you want to delete all the stored
numbers, press a or b to choose
All Delete.
Press Menu/OK.
Then, confirm the Delete by
pressing 1.
Note
• This feature may not be available in
certain areas of the USA and Canada.
• (USA only)
If you redial from the Caller ID history
outside your area code you must set up
your AREA CODE in advance. (See
Setting up your area code (USA
only) on page 10.)
• (Canada only)
You can make a call from the Caller ID
history in combination with a prefix
number. After you enter a prefix number
manually, press Flash/Callwait. Press a
or b to choose a number and press
(Talk).
Setting up your area code (USA only)
Your cordless handset will automatically dial
"1" plus the area code for any number that
does not originate in your area code. The
cordless handset can identify local calls from
your area code by entering your area code in
the Area Code setting. With this setting,
calls returned from the caller ID history to
your area code will be dialed using only
7-digits. If you must dial the area code to call
within your area code, do not enter this
setting. If your dialing plan does not follow the
standard 1 + area code + 7-digit number
dialing system for calling outside your area
code, you may experience problems
returning calls automatically from the caller ID
history. If this is not the procedure followed by
your dialing plan you will not be able to return
calls automatically.
a
Press Menu/OK.
b
Press a or b to choose Area Code.
Press Menu/OK.
c
Use the dial pad to enter your area code.
Press Menu/OK.
d
Press
(Off).
Pause
Press Redial/Pause to put a 3.5-second
pause between numbers. If you are dialing
overseas, you can press Redial/Pause as
many times as needed to increase the length
of the pause.
Telephone
2
2
2
10