AEG OKO-SANTO 2642-6 KG Kullanım Kılavuzu - Sayfa 20

Buzdolabı AEG OKO-SANTO 2642-6 KG için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AEG OKO-SANTO 2642-6 KG 22 sayfaları.

Sayfayı Yazdır

Heavy build up of frost, pos-

sibly also on the door seal.

Unusual noises.

The compressor does not

start immediately after chan-

ging the temperature set-

ting.

Water on the floor or on sto-

rage shelves.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light

bulb, switch off the appliance and unplug it, or pull the fuse or the cir-

cuit breaker.

Light bulb data: 220-240 V, max. 15 W

To switch off the appliance, turn the

temperature regulator to position "0".

Unplug the mains plug.

To change the light bulb, unscrew

the light cover.

Unhook the light bulb cover as shown.

Change the defective light bulb.

Refit the light bulb cover and the screw.

Put the refrigerator back into operation.

Door seal is not air tight

(possibly after changing

over the hinges).

Appliance is not level.

The appliance is touching

the wall or other objects.

A component, e.g. a pipe,

on the rear of the appliance

is touching another part of

the appliance or the wall.

This is normal, no error has

occurred.

Water drain hole is blocked.

D731

Carefully warm the leaking

sections of the door seal

with a hair dryer (not hotter

than approx. 50 ¡C). At the

same time shape the war-

med door seal by hand such

that it sits correctly.

Readjust the feet.

Move the appliance slightly.

If necessary, carefully bend

the component out of the

way.

The compressor starts after

a period of time.

See the "Cleaning and

Care" section.