Brother MFC-6890CDW - Color Inkjet - All-in-One Hızlı Kurulum Kılavuzu - Sayfa 31

Yazılım Brother MFC-6890CDW - Color Inkjet - All-in-One için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC-6890CDW - Color Inkjet - All-in-One 47 sayfaları. Quick setup guide - spanish
Ayrıca Brother MFC-6890CDW - Color Inkjet - All-in-One için: Broşür ve Teknik Özellikler (9 sayfalar), Hızlı Kurulum Kılavuzu (49 sayfalar), Teknik Özellikler (2 sayfalar), (İngilizce) Hızlı Yapılandırma Kılavuzu (48 sayfalar)

For Wireless Network Users

Press TKIP or AES for Encryption Type?

Enter the WPA/WPA2-PSK password you

wrote down in step 15 on page 29 using the

Touchscreen.

You can use the d and c keys to move the

cursor left and right.

The letters appear in this order: lower case and

then upper case.

To enter numbers or special letters, press

repeatedly until the character you want to enter

appears.

(For more information, see Entering Text for

Wireless Settings on page 45.)

Press OK when you have entered all the

characters, then press Yes to apply your

settings. Go to i.

Your machine will now try to connect to your

wireless network using the information you

have entered. If successful, Connected will

appear on the LCD for approximately 1 minute.

If your machine does not successfully connect

to your network, verify your network settings

collected in step 15 on page 29 then repeat a

to h to make sure you have entered the correct

information.

If your access point does not have DHCP

enabled you will need to manually configure

the IP address, subnet mask and gateway of

the machine to suit your network. See the

Network User's Guide for details.

Wireless setup is now complete. A four

level indicator at the top of your

machine's LCD will show the wireless

signal strength of your router/access

point.

To install MFL-Pro Suite, continue to

step 17.

For Windows

Users:

Now go to

Page 34

For Mac OS

Users:

Now go to

Page 38