AEG RCB53121LW Kullanıcı Kılavuzu - Sayfa 10

Buzdolabı AEG RCB53121LW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG RCB53121LW 12 sayfaları.

Sayfayı Yazdır

www.aeg.com

Use LED bulbs (E14 base)

only. The maximum power is

shown on the lamp unit.

CAUTION!

Disconnect the plug from

the mains socket.

1. Pull the left side of the lamp cover

with your fingers to unlock it. Remove

the cover by pulling it towards

yourself.

7. INSTALLATION

WARNING!

Refer to Safety chapters.

7.1 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

7.2 Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

Ambient temperature

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

2. Replace the bulb with one of the

same power and shape, specifically

designed for household appliances.

3. Install the lamp cover.

4. Connect the plug to the mains

socket.

5. Open the door.

Make sure that the light switches on.

rating plate correspond to your

domestic power supply.

• The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a

qualified electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the

E.E.C. Directives.

7.3 Installation of the

appliance and door reversal

Please refer to separate

instructions on installation

(ventilation requirements,

levelling) and door reversal.