Fujitsu fi-748PRB Operatör El Kitabı - Sayfa 9

Yazıcı Fujitsu fi-748PRB için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Fujitsu fi-748PRB 20 sayfaları. Imprinter
Ayrıca Fujitsu fi-748PRB için: Servis Kılavuzu (18 sayfalar)

Sayfayı Yazdır

Remove the protection tape on the print

cartridge.

ATTENTION

Do not touch the metal part of the print cartridge nor put the

tape back again.

Put the print cartridge into the holder with its tab

pointing to the right.

ATTENTION

Be careful not to let the print cartridge catch the print circuit

film.

Bring down the arm of the print cartridge holder

down gently until it locks in and set the print

cartridge in place.

Move the print cartridge to an appropriate

printing position.

The print cartridge should be positioned within the section

where the document will pass through.

10. Close the print cartridge cover.

2.3. Test Print

After loading the print cartridge, check if the printing

operation works normally.

HINT

For details about the operator panel, refer to the Operator's Guide

provided with the scanner.

Push the [Power] button of the operator panel of

the scanner.

 The [Ready] screen is shown on the LCD.

Load a blank document in the scanner.

HINT

●

Use A3 or Double Letter size blank paper. If the size is

smaller than A4 or Letter, printing may not be completed

successfully.

●

Confirm that the print cartridge is positioned within the

document width.

fi-748PRB Imprinter Operator's Guide |