Brother MFC-J430w Ürün Güvenlik Kılavuzu - Sayfa 8

Yazılım Brother MFC-J430w için çevrimiçi göz atın veya pdf Ürün Güvenlik Kılavuzu indirin. Brother MFC-J430w 17 sayfaları. Product safety guide - spanish
Ayrıca Brother MFC-J430w için: Gelişmiş Kullanıcı Kılavuzu (47 sayfalar), Manuel (12 sayfalar), Manuel (21 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar), Güvenlik Kılavuzu (17 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar), Kullanıcı Kılavuzu (41 sayfalar), Hızlı Başlangıç Kılavuzu (37 sayfalar), Hızlı Başlangıç Kılavuzu (22 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), (İspanyolca) El Kitabı (21 sayfalar), (İspanyolca) El Kitabı (16 sayfalar)

IMPORTANT

• Disruption of power can wipe out information in the machine's memory.

• DO NOT put objects on top of the machine.

• (MFC models only)

DO NOT place anything in front of the machine that will block received faxes. DO NOT place

anything in the path of received faxes.

• If the machine does not operate normally when the operating instructions are followed, adjust

only those controls that are covered by the operating instructions. Improper adjustment of other

controls may result in damage or minor exposure to electromagnetic waves and will often

require extensive work by a qualified technician to restore the machine to normal operation.

• A distinct change in the machine's performance may, indicate a need for service.

• The power cord, including extensions, should be no longer than 16.5 feet (5 meters).

DO NOT connect your machine to an AC power outlet on the same circuit as large appliances

or other equipment that requires a significant amount of electricity to operate. Doing this may

cause an overvoltage, tripping your circuit breaker or blowing your fuse. If you cannot avoid

using the machine with these appliances, we recommend that you use a voltage transformer

or a high-frequency noise filter. Use a voltage regulator if the power source is not stable.

• Lightning and power surges can damage this machine. We recommend that you use a quality

surge protection device on the AC power line and any telephone (RJ-11) (MFC models only)

or Ethernet (RJ-45) (Network models only) cable plugged into the machine, or that you unplug

the cords during a lightning storm.

• (For Touchscreen models)

DO NOT touch the Touchscreen immediately after plugging in the power cord or turning on the

machine. Doing this may cause an error.

Important safety instructions

DO NOT attempt to service this machine yourself because opening or removing covers may

expose you to dangerous voltage points and other risks and may void your warranty. Refer all

servicing to a Brother Authorized Service Center. For the location of your nearest Brother

Authorized Service Center, please call:

In USA: 1-877-BROTHER (1-877-276-8437)

In Canada: 1-877-BROTHER