Brother MFC-J825DW Hızlı Kurulum Kılavuzu - Sayfa 32

Yazılım Brother MFC-J825DW için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC-J825DW 42 sayfaları. Quick setup guide - spanish
Ayrıca Brother MFC-J825DW için: Manuel (12 sayfalar), Manuel (21 sayfalar), Ürün Güvenlik Kılavuzu (17 sayfalar), Web Connect Kılavuzu (22 sayfalar), Hızlı Kurulum Kılavuzu (45 sayfalar), Güvenlik Kılavuzu (17 sayfalar), Sorun Giderme Kılavuzu (6 sayfalar), (İspanyolca) El Kitabı (21 sayfalar), (İspanyolca) El Kitabı (16 sayfalar), (İngilizce) Hızlı Yapılandırma Kılavuzu (44 sayfalar)

Sayfayı Yazdır
Brother MFC-J825DW Hızlı Kurulum Kılavuzu
For Wireless Network Users
One-push configuration
16
using WPS or AOSS™
(Windows
Macintosh)
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
c
On your machine, press Menu.
Press Network.
Press WLAN.
Press WPS/AOSS.
When Switch Network interface to
wireless? is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press No.
Note
If your wireless access point/router supports WPS
(PIN Method), you can also configure your
machine using the PIN (Personal Identification
Number) Method. uuNetwork User's Guide:
Configuration using the PIN Method of Wi-Fi
Protected Setup
d
When the LCD shows Start WPS or AOSS,
press the WPS or AOSS™ button on your
wireless access point/router. See the user's
guide of your wireless access point/router for
instructions.
Then press OK and your machine will now
automatically detect which mode (WPS or
AOSS™) your wireless access point/router
uses and try to connect to your wireless
network.
32
®
and
e
A connection result message appears for
60 seconds on the LCD and a wireless LAN
report will automatically be printed.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
on page 33.
Wireless setup is now complete. A four
level indicator at the upper right of your
machine's LCD will show the wireless
signal strength of your access
point/router.
To install MFL-Pro Suite, continue to
step 17.
®
For Windows
Users:
Now go to
Page 35
For Macintosh Users:
Now go to
Page 38