2.
Open the Carrier Sheet and place the folded
document inside.
Align the fold with the right
edge of the Carrier Sheet
so that the document fits
into the Carrier Sheet at
the upper corner.
3.
Load the Carrier Sheet onto the ScanSnap.
•
Load the Carrier Sheet
with the portion striped in
black and white as the
leading edge as shown in
the right figure.
•
When the Carrier Sheet is
used for scanning,
continuous scanning is
not possible. Scan one
piece or one sheet at one
time.
4.
Press the [SCAN] button.
The front and back
images are merged into
a double-page spread
image.
The loading method and ScanSnap Manager's
HINT
settings differ according to the documents to be
scanned. Refer to "ScanSnap S510
Operator's Guide" on the "ScanSnap Setup
CD-ROM" for details.
3.4.2. Scanning irregular-shaped Documents
This section explains how to scan documents that are
difficult to scan as it is.
1.
Right-click the ScanSnap Manager icon
taskbar and select [SCAN Button Settings].
The "ScanSnap Manager - Scan and Save Settings"
dialog box appears.
2.
On the [Paper size] tab, click the
Settings...
button.
"
The "Carrier Sheet Settings" dialog box appears.
3.
On the "Carrier Sheet Settings" window, select
"Create front and back images separately" in the
"Mode" drop-down list, and then click the [OK]
button.
14
S
on the
Carrier Sheet
"
4.
Open the Carrier Sheet and place the document
inside.
Neatly align the top of the
material with the top of the
Carrier Sheet. Center the
material so that it is
entirely contained in the
Carrier Sheet.
5.
Load the Carrier Sheet onto the ScanSnap.
•
Load the Carrier Sheet
with the portion striped
in black and white as the
leading edge as shown
in the right figure.
•
When the Carrier Sheet
is used for scanning,
continuous scanning is
not possible. Scan one
piece or one sheet at
one time.
6.
Press the [SCAN] button.
Scanning starts.
The image is centered and output in the specified size.
The loading method and ScanSnap Manager's
HINT
settings differ according to the documents to be
scanned. Refer to "ScanSnap S510
Operator's Guide" on the "ScanSnap Setup
CD-ROM" for details.
3.5. Scanning Business Cards
1.
From the [Start] menu, select [All Programs]
[CardMinder V3.1]
After CardMinder is started, make sure that
CardMinder is active (its window is brought to the
front.)
You cannot scan Business Cards from Quick
Menu.
2.
Load the business cards onto the scanner. Adjust the
side guides to the business card width.
Side guide
[CardMinder V3.1].
Business card
(Set it face down)
[SCAN] button
Sayfayı Yazdır