Brother Quattro 6000D Manuel - Sayfa 15

Yazılım Brother Quattro 6000D için çevrimiçi göz atın veya pdf Manuel indirin. Brother Quattro 6000D 42 sayfaları. Kit de actualización iii
Ayrıca Brother Quattro 6000D için: Kullanım Kılavuzu (50 sayfalar), Kullanım Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kullanım Kılavuzu (29 sayfalar), Kullanım Kılavuzu (21 sayfalar), (İngilizce) Kullanım Kılavuzu (49 sayfalar), (İngilizce) Kullanım Kılavuzu (21 sayfalar), (İngilizce) Kullanım Kılavuzu (48 sayfalar)

Brother Quattro 6000D Manuel
Brother
Quilting
Feet
27
Open Toe Quilting Foot
Quilting Foot
Open Toe Quilting Foot
The large opening on the front of the foot gives you wide visibility in
the needle area. Use for free-motion, outline quilting, etc.
1. Screw on the Open Toe Quilting Foot, with the pin over the needle clamp screw.
2. Lower the feed dogs.
3. Use the foot controller so that both hands are free to guide the fabric.
4. Select a straight stitch or your preferred stitch such as zigzag stitch.
5. Set the fabric under the presser foot.
6. While starting to sew, press the needle position button twice to pull the bobbin thread
to the quilt top.
7. Gently holding the upper and bobbin threads sew about four locking stitches.
8. Guide the fabric with both hands while keeping the fabric pulled tight.
9. When quilting is finished, sew about four locking stitches and finish the thread ends.
SA187
ABCDEFGHMNO
Requires Low Shank Adapter for ULT series, PC-6500, PC-8200 and
PC-8500 sewing machines.
Quilting Foot
For darning, quilting, or free-motion. The foot raises and lowers
with the needle to allow fabric to be moved between stitches and to
hold fabric in place while stitches are created.
1. Lower the feed dogs.
2. Set the machine for straight stitch.
3. Place the fabric beneath the presser foot.
4. Use both hands to hold the fabric firmly.
5. Begin to sew moving the fabric at an even pace in order to sew uniform stitches roughly
1/16" - 3/32" (2.0 - 2.5 mm) in length.
SA129
SA165
Requires Low Shank Adapter for ULT series, PC-6500, PC-8200 and
PC-8500 sewing machines.
ABCDEFGHMNO
L
Walking Foot/Open Toe Walking Foot
The feed dogs on the walking foot moves at the same pace as the
machine's lower feed dogs to feed the fabric consistently. Fabrics that
can be difficult to sew such as vinyl, leather, quilting layers and velvet
can be easily sewn. Use the walking foot with the closed front for thick
layers of fabric and the walking foot with the open front when greater
visibility is needed.
1. Attach the walking foot to the machine.
2. Set the machine to straight stitch.
3. Sew.
Requires Low Shank Adapter for ULT series, PC-6500, PC-8200 and PC-8500 sewing
machines.
Brother
Quilting
Feet
28
Walking Foot/Open Toe Walking Foot
Walking Foot
SA140
SA107
ABCDEFJKMN
GHO
SA166
SA169
L
I
Open Toe Walking Foot
SA188
ABCDEFJKMN
www.brother.com