Fujitsu Cider Q550 Kullanıcı Kılavuzu - Sayfa 8
Tablet Fujitsu Cider Q550 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu Cider Q550 33 sayfaları.
AUSTRALIAN REGULATIONS
Important Health and Safety Information
This tablet pc complies with the relevant safety
regulations for data processing equipment. If you
have questions about using your tablet pc in a
particular area, please contact your sales outlet
or our Hotline/Help Desk.
Additional safety notes for devices with
modem
WARNING
FOR SAFETY REASONS, ONLY CONNECT
EQUIPMENT WITH A TELECOMMUNICATIONS
COMPLIANCE LABEL. THIS INCLUDES
CUSTOMER EQUIPMENT PREVIOUSLY
LABELLED PERMITTED OR CERTIFIED.
Connection of Non Certified / Approved
peripherals may result in the equipment
operating outside the Australian EMI
Standards.
M o d e m s c o n n e c t e d t o t h e Au s t r a l i a n
telecommunications network must be operated
in accordance with the Labelling Notice. This
modem has been specifically configured to
ensure compliance with the ACMA Standards. Do
not adjust your modem or software outside the
values indicated below. To do so would result in
your modem being operated in a non-compliant
manner.
The unit shall be connected to Telecommunication
Network through a line cord, which meets the
requirements of ACMA AS / ACIF S008:2006.
The equipment shall be powered through an
Australian Approved mains cord set. When the
Secondary Landscape Orientation of the tablet
is held close to the body, the antenna must be
in closed condition to avoid physical damage to
the Antenna.
viii
Call Attempts / Retries:
Applications software shall be confi gured so that
no more than 3 attempts are made to establish a
connection to a given number (Note: if the modem
can detect service tones, up to 10 attempts can
be made). If the call sequence is unsuccessful,
there shall be a delay of at least 30 minutes
before attempting to call the number again.
Failure to set the modem and any application
software used with the modem, to the values shown
above will result in the modem being operated
in a non-compliant manner. Consequently, this
would be in violation of the Labelling Notice for
this equipment and the Telecommunications Act
1997 prescribes penalties for the connection of
non-compliant equipment.