Fujitsu Lifebook T4010D Bios Kılavuzu - Sayfa 7

Tablet Fujitsu Lifebook T4010D için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu Lifebook T4010D 30 sayfaları. Pc
Ayrıca Fujitsu Lifebook T4010D için: Manuel (23 sayfalar)

Sayfayı Yazdır

Menu Field

Options

■

Heads:

A number between

1 and 16

■

Sectors:

A number between

0 and 63

■

Maximum

Display only

Capacity:

■

Multi-Sector

Disabled

Transfers:

■

2 Sectors

■

4 Sectors

■

8 Sectors

■

16 Sectors

■

LBA Mode Control:

Disabled

■

Enabled

■

Transfer Mode:

Standard

■

Fast PIO 1

■

Fast PIO 2

■

Fast PIO 3

■

Fast PIO 4

■

Multiword DMA 1

■

Multiword DMA 2

■

Ultra DMA Mode:

Disabled

■

Mode 0

■

Mode 1

■

Mode 2

■

Mode 3

■

Mode 4

■

Mode 5

■

A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is

used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format

CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for-

mat) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: des-

ignation if a formatted internal hard drive is present since the C: designator is always reserved for the

internal hard drive.The boot sequence ignores the new drive designations, however, your application soft-

ware will use the new designations.

■

Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by

mistake.

Default

Description

–—

This item is active only when Hard Disk is selected as type. You can

change the value by incrementing (pressing the [Spacebar]) or by

typing in the number.

–—

This item is active only when Hard Disk is selected as type. You can

change the value by incrementing (pressing the [Spacebar]) or by

typing in the number.

–—

Displays the maximum capacity of the drive calculated from the

parameters of the hard disk when Auto is selected and the type

is identified as hard disk.

[16 Sectors]

This option cannot be changed when Auto is selected. Specify the

number of sectors per block for multiple sector transfer.

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder,

Head, Sector addressing. This option cannot be changed when Auto

is selected.

[Multiword

Selects the method for moving data to/from the drive. Autotype the

DMA 2]

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.

[Disabled]

Selects the method for moving data to/from the drive. Autotype the

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.

M a i n M e n u