Fujitsu Point 1600 Kullanıcı Kılavuzu - Sayfa 11
Tablet Fujitsu Point 1600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu Point 1600 48 sayfaları. Pen tablet
Ayrıca Fujitsu Point 1600 için: Ürün Referansı (2 sayfalar)
Sayfayı Yazdır
LED
Power LED
Indicates system power state.
LED on continuously.
LED flashing (once every 4 seconds).
LED off
HDD Access
Indicates when the system is accessing the built-in hard disk drive (HDD).
LED
LED on.
LED off.
Charge LED
Indicates battery pack is charging. (Note that this LED flashes once when
external power is initially connected.)
LED on continuously.
LED flashing. (Flashes faster at 90%
capacity, slower at 99%.)
LED off.
Low-Battery
Indicates low charge condition of the battery pack. See "Low Battery Pack
LED
Conditions" on page 2-3 for more information.
LED off.
LED flashing slowly (1 second on, 1
second off).
LED flashing quickly (1/2 second on,
1/2 second off).
LED flashing very slowly
(once every 4 seconds).
Table 1-1 Status LEDs
Appearance of LED
System Status
System is Fully On.
Suspend mode.
System is off.
HDD is being accessed.
HDD is not being accessed.
Fast Charge mode, 0 to 89% of
capacity.
Slow Charge mode, 90-99% of
capacity.
Not Charging, external power is not
connected.
Good Battery, or external power
connected.
Low Battery, approximately 15%
charge remaining.
Very Low Battery, approximately 8%
charge remaining.
Critically Low Battery, system forced to
suspend and cannot be resumed
unless external power is connected or
charged battery pack is installed.
Status LEDs
1-5