Fujitsu Stylistic 3400 Kurulum Kılavuzu - Sayfa 3

Tablet Fujitsu Stylistic 3400 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Fujitsu Stylistic 3400 4 sayfaları. Wall-mount cradle
Ayrıca Fujitsu Stylistic 3400 için: Kullanıcı Kılavuzu (3 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Kullanım Talimatları (1 sayfalar), Kurulum ve Kullanım Kılavuzu (8 sayfalar), Kurulum Kılavuzu (1 sayfalar), Montaj ve Kullanım Talimatları (4 sayfalar)

58_0497_02.fm Page 3 Tuesday, July 10, 2001 2:18 PM

INSTALLING THE RADIO ANTENNA COVER

To attach the radio antenna cover to the pen tablet PC,

perform the following steps.

1. Position the antenna cover in relation to the back of the

pen tablet PC as shown in Figure 2.

2. If caps are present over the mounting holes, remove

them with a small screwdriver, or similar tool.

3. If the FMW42CR2 antenna cover is being used, slide the

open slot in the cover (as outlined in Figure 2) over the

antenna so that the antenna protrudes from the cover.

4. Insert the antenna cover tabs into the two tab slots on

the pen tablet.

Note: If the screws referenced in the step below are either lost or

missing, they can be purchased at most hardware stores (Cross-recessed

head Machine Screw with spring washer and flat washer. Size: M2.5 x

8 mm long. Finish:Black Zinc)

5. Insert the two black screws through the holes in the

hood and secure them to the pen tablet.

Tab Slots

Antenna Slot

(FMW42RC2

model only)

Figure 2. Installing the Radio Antenna Cover

Mounting

Hole

Tab

PC Card Slot