AC Schnitzer G02 M-Technik Montaj Talimatları Kılavuzu - Sayfa 14
Otomobil Aksesuarları AC Schnitzer G02 M-Technik için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. AC Schnitzer G02 M-Technik 20 sayfaları. Front spoiler elements
Sayfayı Yazdır
Mo n t a g e a n le it u n g
AC Schnitzer Front Spoiler Elements X3 (G01) – X4 (G02) M-Technik
Fittint the AC Schnitzer Front Spoiler Elements
Components and surfaces to be glued together
must first be thoroughly cleaned with cleaner !
Fig. 1
Remove paint and primer residue from the AC
Schnitzer front spoiler elements adhesive groove (1).
Fig. 2
Sand down the adhesive groove (Fig. 1.1) on the AC
Schnitzer front spoiler elements and using the cleaner
supplied.
Attach the AC Schnitzer front spoiler elements on the
vehicle and check the position of the AC Schnitzer front
spoiler elements.
Mark the position of the AC Schnitzer front spoiler ele-
ments if necessary.
Fig. 3
Apply the adhesive supplied as a 5mm bead at the in-
ner end of the adhesive groove of the AC Schnitzer
front spoiler elements.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 301 310 / Issue: 31.08.2018 / TSch / REV01
14
1
Fax -135