Fujitsu D2239 Teknik Kılavuz - Sayfa 20

Anakart Fujitsu D2239 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu D2239 39 sayfaları. For tx150 s4

Screen resolution

3.4

Screen resolution

Depending on the operating system used the screen resolutions in the following

table refer to the screen controller on the system board (with ATI VGA driver).

Screen resolution

800x600

1024x768

1280x1024

The ATI VGA driver is supported by the operation systems Windows 2000

Server and Windows Server 2003, and by all LINUSX derivates.

If you are using a different screen controller, you will find details of supported

screen resolutions in the documentation supplied with the controller.

3.5

Temperature and system monitoring aim to reliably protect the computer

hardware against damage caused by overheating. In addition, any unnecessary

noise is also prevented by reducing the fan speed, and information is provided

about the system status.

The temperature and system monitoring are controlled by an onboard controller.

The following functions are supported:

Temperature monitoring

Measurement of the processor and the inhouse temperature by an onboard

sensor, measurement of the ambient temperature by a I²C temperature sensor.

Fan monitoring

Fans that are no longer available, blocked or sticky fans are detected.

Fan control

The fans are regulated according to temperature.

8, 16, 32 bpp

Technical Manual

Features

Refresh rate

60/75/85 Hz

D2239 (TX150 S4)