Fujitsu D2619 Teknik Kılavuz - Sayfa 26
Anakart Fujitsu D2619 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu D2619 36 sayfaları. System board d2619 for rx/tx300 s5
Sayfayı Yazdır
Temperature/system monitoring
Features
Fan control
The fans are regulated according to temperature.
Sensor monitoring
The removal of, or a fault in, a temperature sensor is detected. Should this
happen all fans monitored by this sensor run at maximum speed, to achieve the
greatest possible protection of the hardware.
Voltage monitoring
When voltage exceeds warning level high or falls below warning level low an
alert will be generated.
System Event Log (SEL)
All monitored events of the system board are signalized via the Global Error
LED and recorded in the System Event Log. They could be retrieved in the BIOS
Setup or via ServerView.
Diagnostic LEDs
For signalisation of failures LEDs are situated on the system board.
26
Technical Manual
D2619 (RX/TX300 S5)