Fujitsu D2932 Teknik Kılavuz - Sayfa 23

Anakart Fujitsu D2932 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu D2932 32 sayfaları. For rx330 s1

Features

3.6.1

External connectors

Figure 5: External connectors of the system boards D2440/D2932

1 = PS/2 mouse port

2 = Serial port COM2

3 = USB port 2

4 = LAN port M (Service LAN)

5 = LAN port 2

LAN connectors

On this system board you will find a Broadcom 5715 Dual Gbit LAN controller

and a Service LAN controller. The Dual Gbit LAN controller supports the

transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s and supports WOL function

through Magic Packet™.

It is also possible to boot a device without its own boot hard disk via LAN. Here

PXE and iSCSI protocol is supported.

The LAN controller connectors are equipped with two LEDs (light emitting

diode) indicating the transfer rate and the activity.

It is possible to define the LAN port 2 as the Service LAN port and

Standard LAN port via BIOS setting. In this case the LAN port M will be

deactivated. The LAN port 2 takes over the Service LAN functionality and

the standard LAN port in common (virtual LAN requires two different IP

addresses).

D2440/D2932 (RX330 S1)

Technical Manual

Connectors and DIP switches

6 = LAN port 1

7 = USB port

8 = VGA port

9 = Serial port COM1

10 = PS/2 keyboard port