Fujitsu D2952 Teknik Kılavuz - Sayfa 28

Anakart Fujitsu D2952 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu D2952 38 sayfaları. For bx924 s2

Sayfayı Yazdır

Screen resolution

3.3
Screen resolution
Depending on the operating system used the screen resolutions in the following
table refer to the graphic controller on the system board. The graphic controller
is integrated in the iRMC (integrated Remote Management Controller).
Screen resolution
1280 x 1024 Hz
1600 x 1200 Hz
3.4

Temperature/system monitoring

Temperature and system monitoring aim to reliably protect the computer
hardware against damage caused by overheating. In addition, any unnecessary
noise is also prevented by reducing the fan speed, and information is provided
about the system status.
The temperature and system monitoring are controlled by the iRMC S2
(integrated Remote Management Controller).
The following functions are supported:
Temperature monitoring
Measurement of the processor and the system internal temperature by an
onboard temperature sensor, measurement of the ambient temperature by a
2
I
C temperature sensor.
Fan control
The fans are regulated according to temperature.
Sensor monitoring
The removal of, or a fault in, a temperature sensor is detected. Should this
happen all fans monitored by this sensor run at maximum speed, to achieve the
greatest possible protection of the hardware.
28
Max. color depth
24 Bit
16 Bit
Technical Manual
Max. frequency
60 Hz
60 Hz
D2952 (BX924 S2)