Fujitsu D3049 Teknik Kılavuz - Sayfa 14

Anakart Fujitsu D3049 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu D3049 36 sayfaları. System board for primergy tx140 s1 / tx120 s3

Sayfayı Yazdır

Important information

Notes about boards

During installation/deinstallation of the board, observe the specific

●

instructions described in the Upgrade and Maintenance Manual for the

respective server.

Shut down the server and disconnect the power plug, before you make

●

modifications on an installed board.

To prevent damage to the board, the components and conductors on it,

●

please take great care when you insert or remove boards. Take great care

to ensure that extension boards are slotted in straight, without damaging

components or conductors on the board, or any other components, for

example EMI spring contacts.

Be careful with the locking mechanisms (catches, centring pins etc.) when

●

you replace the system board or components on it, for example memory

modules or processors.

Never use sharp objects (screw drivers) for leverage.

●

Do not damage or modify internal cables or devices. Doing so may cause a

●

device failure, fire, or electric shock.

Do not touch the circuitry on boards or soldered parts. Hold the metallic

●

areas or the edges of the circuit boards.

2.2

CE certificate of conformity

The board complies with the requirements of the EC directives

2004/108/EC regarding "Electromagnetic Compatibility" and

2006/95/EC "Low Voltage Directive". This is indicated by the CE

marking (CE = Communauté Européenne).

Compliance was tested in a typical PRIMERGY configuration.

Technical Manual

TX140 S1 / TX120 S3