Fujitsu MB2146-401 Uygulama Notu - Sayfa 12

Anakart Fujitsu MB2146-401 için çevrimiçi göz atın veya pdf Uygulama Notu indirin. Fujitsu MB2146-401 23 sayfaları. F2mc-8fx family evaluation board
Ayrıca Fujitsu MB2146-401 için: Kurulum Kılavuzu (30 sayfalar), Kullanım Kılavuzu (34 sayfalar)

Sayfayı Yazdır
Fujitsu MB2146-401 Uygulama Notu
MB2146-09 – Installation Guide
Chapter 3 Setting up the Emulation System
Table 2: Setting of product selector switch

3.3.3 How to mount oscillator on MCU board

Plug crystal oscillator or ceramic resonator into the crystal oscillator mounting
sockets (for the main clock and sub clock) on the MCU board. The MCU board has
one crystal oscillator mounting socket for the main clock (SC1-SC3) and another for
the sub clock (SC4-SC6). To distinguish them from each other, the board has the
"MAIN CLOCK" and "SUB CLOCK" labels printed near the main-clock socket and
sub clock socket, respectively. Mount the crystal oscillator along with two capacitors
on the MCU board. By use of a ceramic resonator these capacitors are nit required.
Capacitor mounting socket*
Capacitor mounting socket*
Crystal oscillator mounting socket
Ceramic
Crystal
resonator
oscillator
*Capacitors are not required if a
ceramic resonator is used!
Figure 8: Crystal or ceramic oscillator mounting
MCU-AN-395002-E-V10
- 12 -
© Fujitsu Microelectronics Europe GmbH