Fujitsu MB91460 SERIES Başlarken - Sayfa 37

Anakart Fujitsu MB91460 SERIES için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu MB91460 SERIES 41 sayfaları. 32-bit microcontroller
Ayrıca Fujitsu MB91460 SERIES için: Kullanıcı Kılavuzu (45 sayfalar), Uygulama Notu (23 sayfalar), Uygulama Notu (26 sayfalar), Uygulama Notu (29 sayfalar), Uygulama Notu (29 sayfalar)

Sayfayı Yazdır

Chapter 7 Setup / Change Connection PC – Emulation System

3 When saving again the file Services be sure that your editor (e.g. notepad) will

not add any extension, e.g. .txt, to your file. To get sure, use quotation marks

for the filename:

File save as: "services"

4 The file hosts is used to make a redefinition of the complex IP-number with a

simple name within your global network. This may be important if you use a

DNS-Server. Of course, you can define different names for the same IP-

Address, as shown below. Edit file hosts and add the following line:

„The unique IP address (as set by LAN-Address, see above)" „Nickname of

emulator"

e.g. 141.187.6.82

When saving again the file Hosts be sure that your editor (e.g. notepad) will not

add any extension, e.g. .txt, to your file. To get sure, use quotation marks for

the filename:

File save as: "hosts"

5 The file lmhosts (or lmhosts.sam) is used to make a redefinition of the

complex IP-number with a simple name within your local network.

Of course, you can define different names for the same IP-Address, as shown

below. Edit file lmhosts and add the following line:

Getting Started

Emulator

Figure 25: Add a Host

- 37 -

MCU-AN-391005-E-V17