Fujitsu PRIMERGY TX100 S1 Teknik Özellikler - Sayfa 8
Anakart Fujitsu PRIMERGY TX100 S1 için çevrimiçi göz atın veya pdf Teknik Özellikler indirin. Fujitsu PRIMERGY TX100 S1 13 sayfaları. For tx100 s1
Ayrıca Fujitsu PRIMERGY TX100 S1 için: Servis Ek Kılavuzu (46 sayfalar), Seçenekler Kılavuzu (46 sayfalar), Teknik Kılavuz (32 sayfalar)
Sayfayı Yazdır
B
II
Section
One of following CPU´s has to be selected
for an orderable basic unit
Dual-Core CPU`s
- 1x 64-bit Intel
Core2 Duo Exx00 (2/3MB SLC) or
Xeon UP (4/6MB SLC)
and heat pipe
with 1066 or 1333MHz Frontside Bus
occupies socket for one CPU
Pentium DC E5200 2.50GHz 2MB 800MHz FSB (65W)
Pentium DC E5400 2.70GHz 2MB 800MHz FSB (65W)
Pentium DC E6300 2.80GHz 2MB 1066MHz FSB (65W)
Pentium DC E6500 2.93GHz 2MB 1066MHz FSB (65W)
Core2 Duo E7400 2.80GHz 3MB 1066MHz FSB (65W)
Core2 Duo E7600 3.06GHz 3MB 1066MHz FSB (65W)
Xeon UP E3110 3.00GHz 6MB 1333MHz FSB (65W)
Xeon UP E3120 3.16GHz 6MB 1333MHz FSB (65W)
Quad-Core CPU`s
- 1x 64-bit Intel Xeon UP (6/8MB SLC = Second Level Cache on Chip )
and heat pipe
with 1066 or 1333MHz Frontside Bus
occupies socket for one CPU
Xeon UP X3220 2.40GHz 2x4MB 1066MHz FSB (95W)
Xeon UP X3330 2.66GHz 6MB 1333MHz FSB (95W)
III
Section
There are 2 memory banks with 2 DIMM slots each.
Single channel memory configuration allow maximum flexibility:
Additional memory can be configured as single memory modules.
Dual channel memory configurations for maximum performance:
For optimum performance memory has to be configured in pairs of memory modules with identical size.
S26361-F3372-E413
Main memory 1GB ECC
DDR2 800/PC2-6400 unbuffered
consisting of one module
max. 4x per system
IV
Section
ATI ES1000 (32MB) on board
S26361-F2748-E533
PY VGA Card 256MB PCI-e x1
NVIDIA Quadro NVS 290
256 MB PCIe-x1
2x DVI or 2x VGA or
1x DVI plus 1x VGA
cables adapters included
Dual head + fully 3-D
supported for Windows OS
not supported for Linux OS (native)
full height bracket
max. 1x per system
C
Processor
S26361-F3582-E520
S26361-F3582-E540
S26361-F3582-E630
S26361-F3582-E650
S26361-F3582-E740
S26361-F3582-E760
S26361-F3503-E210
S26361-F3503-E220
S26361-F3504-E220
S26361-F3504-E330
Memory
S26361-F3372-E414
Main memory 2GB ECC
DDR2 800/PC2-6400 unbuffered
consisting of one module
max. 4x per system
Graphics
The hight end optional NVIDIA NVS290 graphic card offers dual head operation
and fully 3D video support.
The cables for either two times DVI or VGA connections are part of the delievery.
This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.
Only one card per server is allowed.
PY VGA card must be installed in slot 4
S26361-F2748-L533
PY VGA card 256MB PCI-e x1
for loose delivery
Fujitsu Technology Solutions x86 PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX100 S1
Status 2010-06-30
8 of 13