Fujitsu PRIMERGY TX100 S1 Teknik Kılavuz - Sayfa 22
Anakart Fujitsu PRIMERGY TX100 S1 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Fujitsu PRIMERGY TX100 S1 32 sayfaları. For tx100 s1
Ayrıca Fujitsu PRIMERGY TX100 S1 için: Teknik Özellikler (13 sayfalar), Servis Ek Kılavuzu (46 sayfalar), Seçenekler Kılavuzu (46 sayfalar)
Sayfayı Yazdır
Connectors and jumpers
Settings inside front panel connector
A
B
C
Figure 4: Jumper settings
V
CAUTION!
Please pay attention to the exact position of the jumpers!
A
inserted
B
inserted
not inserted
C
inserted
not inserted
22
Pin 16
Pin 16
Pin 16
Factory setting
System and BIOS Setup password are skipped when
the device is switched on and may be changed.
System and BIOS Setup password must be entered
when the device is switched on.
The System BIOS executes from floppy drive A: and
the inserted "Flash-BIOS-Diskette" restores the
System BIOS on the system board.
Normal operation (default setting).
Technical Manual
Pin 1
Pin 2
D2679-B11 (TX100 S1)
Features